The trim is snapped into place. Start at a corner and gently pry. one tab at a time.
Thanks for using FixYa - a 4 THUMB rating is appreciated for answering your FREE question.
Press downward towards the floor on the bottom of the dispenser housing as hard as you can while pulling outward on it.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
I have a side by side whirlpool E22DQ frig. Found thick greenish black mold growing around the ice dispenser. How can I get the small trim cover piece off so i can field-strip around the dispenser? What do you recommend I use to kill the mold and not harm the plastic?
I would use warm water and vinegar.\015\012There are 2 small slots under the trim at the bottom, If you insert a small rigid pin in the slot on either side this will unlock the trim. Just pull toward you. ...
I have a Whirlpool side by side with ice maker and water dispenser manufactured in 12/2001, model ED5FHGXKQ02. We have never had a problem with it until today. Woke up this morning and all food in the freezer was pretty much defrosted and ice melting. refrigerator temp looked to be around 48. fan was blowing in freezer but only cool. temp settings were both set in the normal positions and have always been set there. Called to have someone come out and now after a few hours later it now appears f
It could be the defrost system which I describe below. Also make sure the fan around the back near the compressor behind the cardboard cover is running when the compressor is. It could have stopped and started back. I would particularly check the def ...
Whirlpool side by side refrigerator Model# GD25BFCHW00 Serial# SJ4446008 Manufacture Date: 11-99 Ice dispensor does not dispense ice. Unit makes ice and dispenses water, but when ice dispensor arm is pushed no ice comes out either in cube or crush mode, no sounds are made either. (Just prior to this failure, intermitently the the ice would come out crushed-even in cube mode!) Thanks
Whirlpool refrigerator side by side model ED5FHGXKT02. The ice maker dispenser on the front of refrigerator stop working. The water dispenser still works only the ice side stopped. Any idea what needs to be replace to get it working again? And how do you take off the front of the dispenser on the front of the refrigerator? Thank you Lynn
I have a GE PROFILE side by side refridgerator model #
PS123MGPCWW. my water and ice dispenser stop working periodically (for days at a time) and then come back on. it doesn't appear that the water reservoir is frozen...it just stops working. the icemaker continues to MAKE ice during this time, it just will not dispense ice or water. i can hear a clicking noise when i push the dispenser in, but there is no other response. a repairman came out and couldn't figure it out, either. any sugges
I have Whirlpool Gold Side by Side Refrigerator/Freezer (Model #gs6nvexsl. The ice is generated fine, but will not dispense. The dispenser itself does not make a sound (auger does) when I depress the button for ice. I think (correct me if I am wrong) I have isolated the problem to the ice dispensing motor (PN# AP4410923). Do you think this is truly my problem and if so, how do I replace the motor?
Whirlpool GS6NVEXSL Side by Side Refrigerator
I have a Whirlpool model EC3JHAXRL13 side-by-side refrigerator/freezer. The plastic part where the pin goes into the dispenser housing is broken off but every website I have looked at says that the dispenser housing is not available to order. I can't use the ice dispenser because air gets in and partially melts the ice,so it won't dispense. I have had to tape the opening closed.
Whirlpool ED5VHGXM Side by Side Refrigerator
I have a 12 year old Whirlpool side-by-side refridgerator (ed20db) with water and ice dispenser. I have not used the water dispenser for years, but for some reason when I hit the lever yesterday, it did not work (no motor running) and now is leaking through the end of the tube next to the lever. I just want to stop the leak because I don't use the water dispenser. I do use the ice dispenser, and that works just fine. How do I stop the leak?
You have a possible water valve that is not shutting off all the way on the water dispensing side, it has 2 coils, one for ice and one for water. the other possibility is the dispenser tank is frozen, from being too cold in the refr. section and tha ...
Whirlpool GS6NBEXR Side by Side Refrigerator
Replace water inlet valve for ice dispenser with new. When icemaker cycles it dispenses through the water dispenser instead of tube going to ice maker. I have switch lines around but can only get water dispenser to work normally.I have wirlpool side by side model # ED5GTFXKQ02.
The ice maker is what tells the water control valve to open so it may be correct now and the thermostat in ice maker may be defective. Part 27 or ...
I recently bought a Whirlpool refrigerator, side by side with an ice maker. Model No. ED2KHAXVQ01. I've only had it for 5 weeks and the ice maker makes ice, but it won't dispense through the door. When I push the lever in it makes a bad sound and no ice comes down. Also, I can't get the ice bin out, even pressing the button on the side. Help! It's too new to break already.
Whirlpool 21.8 cu. ft. Side-By-Side Refrigerator with EZ-Change Ice and Water Filter
I have a whirlpool side by side refridgerator about a year or more ago the water dispenser stopped working and now the ice cube dispenser also stopped working it is no longer making ice into the container. any help?
Your water line into the refrigerator is probably plugged up. First, check at the cut-off valve where the house water connects to the refrigerator water line. Mineral deposits often form in these small valves and can block the water flow.\015 ...
Whirlpool 25.6 cu. ft. Side-by-Side Refrigerator with In-Door-Ice Dispensing System
The ice cube dispenser quick working in my GE side by side refridgerator. It is a model # SSH25KFRF WW. When I push the lever to dispense ice the light goes dim and there is a faint clicking sound. When the lever is released the light stays dim for a few seconds then goes out.
I have a whirpool side by side refrigerator. I have replaced the ice dispenser auger drum. Its all put back together, but I cant figure out how to install the control arm return spring back on the control arm.
Do you have a diagram that shows how this is put back on, and the positioning to bring tension back to the spring? It part number 1119020 return spring for the control arm on the ice dispenser for a Whirlpool model number ED25QFXHW00
I have a Kenmore side by side refridgerator, 2-yrs old, model #106 57378700 that has a problem with the door ice dispenser. It seems the trap door to control the delivery of ice from inside has come off it's hinge and won't operate. I think the trap door only needs to be popped back in place, but it looks like the entire dispensing unit front cover will need to be removed to get at it. Am I correct and is this the solution as described? How do I remove the cover (or whatever is required) to get
In order to remove the exterior trim, first remove the drip tray. At the bottom of the exterior trim you will find two slots. In order to disengage the engagement clips insert a medium flat blade screwdriver and pop them forward while pushing down o ...
Kenmore 55612 / 55614 / 5561 / 655619 Side by Side Refrigerator
Whirlpool imperial series refrigerator side-by-side with in door ice/water dispenser has infrared ice control but will not make ice, but does dispense water. model #ed5lhaxm011 series #st0437882
WORKED FINE FOR 6 YEARS. STOPPED REFRIDGERATING DURING PERIOD OF LOW USE - FURNISHED BUT VACANT HOUST. POWER TO UNIT GOOD. LIGHTS ON. COILS CLEAN. FAN RUNS. DON'T KNOW IF COMPRESSOR RUNS. CIRCULATED AIR IS NOT COOLED. OBVIOUSLY NO ICE PRODUCED. TRIED TURNING OFF FOR 2 DAYS THEN TURNED BACK ON AT MID TEMP SETTINGS - NO CHANGE; NO COOLED AIR BEING CIRCULATED. THIS IS A WHIRLPOOL SIDE BY SIDE, 25.4 CU FT, ICE COLLECTOR & DISPENSOR IN DOOR, MODEL GD5SHAXLT02, SN 4591203 REFRIDGERATOR. HAS
Hello there again sorry i got knocked off line could you reenter the chat session ...
Help ! My GE Profile side by side refridgerator model PSC25MSTA SS is almost three years old. This morning the fridge side dispalyed an inside temp of 90 degrees, and three sticks of butter inside had completely melted. Yesterday I notice the ice in the ice dispenser seemed to be melting, however last night the ice was fine. Ive had a similar problem a month ago when the fridge temp displayed 57 degrees and the freezer display showed 32 degrees but later that evening upon returning from work the
GE PSC25MSTSS Stainless Steel
Just replaced the ice maker and now No water going to ice maker or water dispenser in door. I've manually filled the ice maker and it makes ice. I have a Whirlpool side by side model ED25PQXFW01 purchased in Aug 1998 (about 10 years old). Any suggestions?
Replace the water inlet valve ...
I have a Whirlpool Refrigerator side by side with In-Door Ice Dispensing System. Up until a couple of days ago the ice maker was making ice perfectly. All of a sudden it stopped and has not made ice for 2 days. Our refrigerator is a Model #EDSPHAXMD00, purchased 12/03. What should I do? Thank you
#1 when is the last time you changed your filter\015\012#2 is your water valve working\015\012#3 replace the ice maker, it is easy three screws ...
I have a Whirlpool side by side refrigerator, Model number: ED5FTGXKQ02. I am having a problem with the ice maker. The water drips out of the water chute into the ice tray and all down the back of the freezer. It makes solid ice chunks so that we are unable to use the dispenser. I do not know what part I need to replace. Can you help?
Good day,\015\012The primary problem is the water valve in the bottom back of the machine not shutting down completely after a fill cycle. \015\012This dual valve is non repairable, and you will need to replace it with a ...
IM WORKING ON A WHIRLPOOL REFRIGERATOR MOD.#GS5SHAXNLOO, SER#SR3439925. THIS IS A SIDE BY SIDE MODEL WITH THE ICE BUCKET AND AUGER ASSEMBLY ON THE DOOR. I AM NOT GETTING ANY ICE THROUGH THE DOOR,THE AUGER ISNT EVEN TURNING ON.THERE IS PLENTY OF ICE AND NO OBSTRUCTIONS...THE WATER WORKS WELL.SO I KNOW THE DISPENSER BOARD IS GETTING POWER.THE BOARD WAS CHANGED ABOUT A YEAR AGO FOR THE SAME PROBLEM.WHAT DO I DO?I THOUGHT THIS ELECTRONIC **** WAS SOPPOSE TO MAKE THINGS SO MUCH BETTER. I APPRECIATE Y
Hi\015\012\015\012\015\012Thanks for using FixYa. To start\015\012with remove the ice bin, remove the wires from the auger motor. With the\015\012freezer door op ...
GE refrigerator Model No. GSS25QGMDBB. I am trying to get the "trim recess disp bk", ie. the trim around the ice dispenser on the freezer door to fix the ice shute door, it doesn't close without pushing on it. How do I get the trim off?
You will have to pry it off gently. A heat gun may help melt the double-stick adhesive that is holding it on. ...