I believe that one blade is larger then the other, and the wires will only connect to a certain blade. If this is not the case in your situation, the PTC is an inline AC device; it doesn't matter which wire is connected to a specific lead.
Orange is positive. black is negative. You can get a manual at retrevo.com, repairclinic.com or others.
Suggested Questions/Answers :
It is recommended you read all this kind of situations
I have a GE GSC23LSRCSS refrigerator.
The overload PTC failed, we had a GE technician assess the repair needs, and we ordered a new Overload PTC model #wr09x10107.
I understand how to attach the overload ptc and relay to the fridge. That part is easy. However, when the old overload was disconnected, two wires: (orange and black) were detached from the overload PTC.
I'm not sure which connection to put the orange, and which place to put the black.
On the new overload ther
I believe that one blade is larger then the other, and the wires will only connect to a certain blade. If this is not the case in your situation, the PTC is an inline AC device; it doesn't matter which wire is connected to a specific lead. ...
I have an 11-year-old Jennair side by side (JCD2289AEB) that suddenly stopped cooling. The compressor feels warm but does not run. The overload protector is clicking every minute or two, but compressor doesn't start. I put an ohmeter across the compressor's 3 terminals and got a couple dozen ohms all 3 ways. Do I need a new refrigerator?.
Jenn-Air JCD2295HES Side by Side Refrigerator
Just purchased new water valve assembly, I marked the old valves so to match the lines with the new valves,the new one is a little different the old one does not mark the outlet connections to the lines, one is green and the other one is blue the new one is marked W2 green and W1 red. Just want to make sure I put the lines in the right valve. I know where the inlet line goes and then a line goes to the water filter and then back to the assembly then there is the two solenoids one green W2 and R
The start device on some models of refridgerator for maytag and whirlpool have been recalled. If your appliance was manufactured in the last 5-10 years you may be having an issue with this component. Mine recently caught on fire at this compone ...
Whirlpool 25.6 cu. ft. Side-by-Side Refrigerator with In-Door-Ice Dispensing System
Door insulation or lining has areas that are flat and leak air. I had two areas that I could slide a dollar bill out of on my RV refrigerator door. It is less than 4 years old. I stored it with the doors open and put a clothespin on the flattened sections and came back a week later. Now there were 5 or 6 flatten areas of lining, but where I put the clothespin, it stayed out ok. The lining looks in new condition other wise, and nothing was hitting it to flatten it out. It is almost like it is b
The best thing to do is to reform the gasket use a Hair Dryer to soften the gasket all the way around be carful not to melt it once it is good and warm then close the door and tape it shut fro 24 hours it will re-shape itself to the frame ...
Installing a new overload relay kit on my maytag sbs fridge. The PTC start device and the overload. from fridge have blue orange and white. where do i install each wire on the relay ...Thanks
Maytag MSD2756G Side by Side Refrigerator
The 35 watt 12volt buibs in the freezer are burned out so i picked up two new buibs, put them in still no lights so i put 12volts to the old bulbs and they lite up i checked the snap conections to make sure they are tight still no light any ideals. don
The bulbs are controlled by switch.If the bulbs are new then bulb is not the issue.The switch is faulty.But in some cases the wire from the switch gets loose/burnt or shorted causing this problem.So check for the continuity on the wires If the wires ...
GE Monogram® ZISS420DMSS Side by Side Refrigerator
I have a 2006 Jenn Air french door / bottom freezer refrigerator. We have done routine water filter changes in the past without any problem. This time, however, it was difficult to unscrew the old filter, but I got it off without anything breaking/cracking. However, when I put the new one in, then tried to run the water for a minute or two (as recommended), all I got was a trickle, then nothing. I have tried holding down the dispense button for a prolonged period to bleed air out - no luck. On t
Take out the filter and check to see if there are any clogs and or jams. Also check and make sure a part of the other filter did not break off when you took the other one out because it might be blocking the flow of water. ...
Jenn-Air JFC2089H Bottom Freezer French Door Refrigerator
Fridge temperature Our fridge, just over 12 months old is having difficulty maintaining temperature. The light on front says 2 degrees but in reality the interior is anywhere between 5 and 7 degrees, even after an overnight period when the door has not been opened. Sick of goods going off!! There are only two of us at home and we do not overload said fridge. If we put newly bought food in we use the super button on the front to boost the cooling.
Sounds like its lack of gas you need to ring the suppliers up and see where you stand as i think theres a different warranty for that ok ...
How do i install a 3 in 1 hard start kit on a commercial refrigeration unit? I bought one on the advice of some folks on one of these sites. I am very handy but there are more wires and other things than I was expecting and it doesn't seem like a 1:1 swap with the old capacitor, which just had two black wires. This one has white, black, and red, with two power wires also. In the J-box I'm looking at the wires from the old capacitor and power wires for the compressor and for the condenser, so not
Hey,\015\012\015\012If you remove the cover at the compressor relay/start device, you should see 3 pins for the unit, r, c, and s ( run, common, and start) you'll notice the 3in1 will instruct where to attach the bk, rd, & wh. wires to match. The oth ...
Traulsen G20003 Stainless Steel Commercial Refrigerator
I have a GE side by side refrig. I want to install a 3n1 start capacitor. The instructions with the product are quite clear on wiring to the run capacitor and the compressor but offer no help on how to attach the two line wires. The two wires off of the old start relay (one start wire, one run wire) and the two wires off the old run capacitor and the one Black wire(the former neutral) to the compressor are all available. How do I hook this thing up to be sure it is controlled by the thermostat a
The answer is to take the orange wire from the run capacitor and the orange wire from the relay and twist them together and attach to one of the line wires. Attach the other line wire to the black wire that was previously the ground on the compressor ...
GE GSS20IEP Side by Side Refrigerator
After changing to new filter, the fridge started making a slapping noise when you attempted to use water(pipe slapping sound), I put the old filter back in and it worked, I had another new filter used it, and the same problem as the 1st new filter. Now the old filter is doing the same thing.
Sounds like there is air in the line. Have you tried running the water for a few minuets? ...
GE Profile PSW26P Stainless Steel Side by Side Refrigerator
My Dometic Model RM 2652 refrigerator caught on fire, lucky I was near by and was able to put it out before it did too much damage, well so I thought. The insurance company gave us $900 to fix and the camper place is telling me that won't cover the cooling unit and parts and the insurance won't give anymore because it 6 years old. My question is how hard is it to change it out and put a new one. Does the power module come with the new unit. I had 2 wires that melted one was the thermofuse and th
There was a recall on that model. They were changing parts to avoid potential fires. You may be able to get compensation from the manufacturer. ...
Dometic RM2652 Refrigerator
The water filter display on my whirlpool fridge showed F1% but the replacement whirlpool fridge filter that I ordered off the internet doesn't fit, so I put the old one back in and reset the display from F1% to F99%. Now I find that I can't take out the old one to put another new one back in. Is this because the display has to be on F1% before the filter can be removed?
Hi neil.i think you do mate from what i can rember doing that when i was servicing these type of frigerators.give it a trye and see what happens.what model is it.?stef ...
TWO YEAR OLD REFRIGERATOR STOPPED WORKING COMPRESSOR SUPPOSELY FAILED ACCORDING TO REPAIRMAN. ORDERED NEW COMPRESSOR, WHEN REPAIR MAN OPENED UP THE COOLER OUT CAME RUST AND GRIM. REPAIRMAIN SAYS PARTS UNAVAILABLE AND UNIT IS UNFIXABLE. HOW CAN A TWO YEAR OLD JENN-AIR BE USELESS? ANY SOLUTIONS?
Hi,\015\012\015\012Not sure for one compressor going bad how can the fridge be useless.\015\012\015\012 \015\012\015\012\015\012 ...
I'm putting a new defrost timer in my jenn air refridgerator Model # JTB2688AEW, about 10 years old, the new timer has a setting for a 10 to 35 min cycle, the old timer just has the 10 hour info, but not the cycle minutes, what do i do? thanks
Good day,\015\01210/35 is fine. They don't always give the defrost period time. The original may have been a 10/30 or the same as the one you have. In either case the longer the better, since it allows more time for the water to drain out and ...
GE side by side fridge - no cooling. The compressor does not come on. I disconnected the orange and black wires from the overload relay, plugged the fridge back in and I do not have voltage to the orange and black wires.
The defrost timer could be stuck in the defrost mode. You need to locate it and manually forward it to see if it is indeed stuck in defrost. The fan motor and compressor should be running together as well as inside fans. A good clue that the timer is ...
25 year old Whirlpool side by side fridge not cooling. Thermostat OK, both fans running, relay OK, overload protector stays closed 10 seconds or so then kicks out for a minute or so then closes again and repeats cycle. Power to overload is 122 Vac when overload is open but drops to 114 when compressor runs for short time. Has the compressor gone belly up causing a heavy load on power. This is garage fridge, formerly kitchen fridge. Is it time to get a new whirlpool for kitchen and move kitchen u
Hi try out the following settings....Check your temperature setting.- Check if no ice present in the evaporator, try the defrosting- Check vents if air is present if no then check your blower if running or icing evaporator.- ...
Whirlpool ES5FHAXS Side by Side Refrigerator
I just bought a compresor start device kit for my maytag model PTB1953GRW and when going to hook it up the instructions call for a red, blue, and a harness of wires. I have a blue wire, a white and two orange wires. i need to know where these all go. One orange wire comes out of the harness that the blue one is in, and the white and other orange wire both come from a small black box.???
Hi\015\012\015\012\015\012Thanks for using FixYa. Please check this wiring diagram for your Refrigerator:\015\012\015\012\0 ...
Hello, I have a under the fridge water filter for my ice maker. Two problems: 1- I cannot remember how to release the pressure in the filter to be able to open the cylinder and put in a fresh filter. 2- the current filter which is actually more than a year old still continues to put large sums of charcoal in my ice. It has done this from the day it was first put in and never has stopped.
Just remove the filter by turning it no need to release pressure it sounds like your old filter was bad from day one ...
We have a McCalls 4070 three door fridge that all the R12 refrigerant has leaked out. Our repair guy says it's a small leak but that to do it right he'd evacuate it, put a new dryer on it and then change it over to a new type of refrigerant that won't be as expensive in the future. To do all that is $1500 - $2000 and the refrigerator is 20 years old. Do you think I should do that or buy a new residential fridge (we don't need so much space) that's cheaper to work on?
Hello Maureen,In 20 years the technology changes and reaches its highest available. Instead of repairing the old refrigirator you have buy the new refrigirator.The new refrigirator available in marlet are highly advanced and ...
McCall DT4-4070 Commercial Refrigerator
Overload relay bad ordered new one part# 67005560 pulled old relay out and it has different connection did I order wrong relay?
Normally it a replacement part but overload is a clickson ...
Replace door I need to replace the door on the elite, and remove the old handle from the old door, and put it on the new door. Any ideas?
Here are some examples of model numbers for this appliance: 106.8782070, 596.58692890, 119.909851, 119.3101279, 198.887482, 253.835123\015\012• Inside the refrigerator or freezer, on the upper left or right side wall   ...
Kenmore 73502 / 73504 / 73509 Bottom Freezer Refrigerator
I bought a new drum for the front of my icemaker. I can't figure out how to get the old drum off the auger and put the new one on.
Sorry but unable to help without correct model number. Number has to come off the refrigerator itself located inside the fresh food area. Thanks. ...
I need to install a new fitting (part # 2196157). That is the fill tube on the ice maker on our whirlpool refrigerator (model number ed2fhgxkt00) The water line is already detached since the threaded part of the fill tube was broken. Is this as simple as removing the screws holding the fill tube to the back of the refrigerator, pulling out the old tube, pushing in the new matching tube, putting the screws back in at the back of the refrigerator and attaching the waterline? Also, when I discovere
Yes that s it. You may have to tug a little to get the old one out as sometimes the foam will try to hold them in a little tight.One thing to check before you connect your water line. Take a look at the end of the water line for a minute ...
Whirlpool ED2FHGX Side by Side Refrigerator
We bought a 2002 kitchenaid superba with aquasense In-Door-Ice. We were told everything works on it and it looks like a brand new fridge but we've had it plugged in for 48 hours and there is water but no ice. the dispenser has never filled with water and there is a blinking red light. The wire bar I noticed is missing and tried putting on a bar from our old fridge and put it in the down position but I don't know if that's why it isn't working? Any ideas?
KitchenAid 22.0 cu. ft. Side-By-Side Refrigerator with AquaSense In-Door-Ice and Water